Showing 3529–3552 of 5951 resultsSorted by latest
Volvo Penta Spare Parts — Marine & Industrial Diesel Engines
VMP supplies a focused catalog of compatible spare parts for the Volvo Penta marine and industrial diesel engine range. The selection covers marine propulsion engines (D-series with IPS pod drive, Aquamatic stern drive, inboard shaft drive), industrial diesel engines for stationary power and off-highway equipment (TAD, TWD series), genset platforms, and the legacy KAD, KAMD, AQAD marine and TAMD industrial engine families still active worldwide. Each listing carries the Volvo Penta part number for direct cross-reference against the engine parts manual before ordering.
About Volvo Penta
Volvo Penta is the marine and industrial engine division of AB Volvo Group, with production lineage going back to 1907 (originally as Penta, merged with Volvo in 1935). Headquartered in Gothenburg, Sweden, Volvo Penta operates as a separate business unit alongside Volvo Trucks and Volvo CE. The brand is known for the IPS (Inboard Performance System) pod drive — a forward-facing twin-counter-rotating-propeller drive that revolutionised yacht propulsion — and for industrial-grade diesel engines used in mobile equipment, mining, agriculture, and stationary power generation.
Volvo Penta engines are widely deployed in commercial fishing vessels, leisure marine, ferry and patrol boat operations, mining haulage, mobile cranes, agricultural harvesters, gensets, and industrial pumping across Europe, Scandinavia, North America, Asia, and the Middle East. The D4 / D6 / D9 / D11 / D13 / D16 marine common-rail engines and the TAD industrial families generate the bulk of current parts demand, alongside legacy KAD, KAMD, TAMD platforms still operating across high-hour vessels and equipment.
Engine Series Covered
- Marine propulsion (D-series) — D2, D3, D4, D6, D8, D9, D11, D13, D16 common-rail diesel engines for IPS, Aquamatic, and inboard shaft applications.
- Marine IPS — IPS300, IPS350, IPS400, IPS450, IPS500, IPS600, IPS650, IPS800, IPS950, IPS1050 pod drive systems.
- Marine Aquamatic stern drives — DPS, SX, DPH, DPI sterndrive units.
- Industrial diesel (TAD-series) — TAD550, TAD650, TAD750, TAD850, TAD940, TAD1240, TAD1340, TAD1640, TAD1641, TAD1642, TAD1660, TAD1661 stage-V industrial.
- Industrial diesel (TWD-series) — TWD740, TWD1030, TWD1031, TWD1240 industrial off-highway.
- Genset platforms — TAD, TWD-derived stationary power and prime / standby genset configurations.
- Legacy marine — KAD32, KAD42, KAD43, KAD44, KAMD42, KAMD43, KAMD44, AQAD41, AQAD40, AQ series gasoline.
- Legacy industrial — TAMD41, TAMD42, TAMD61, TAMD62, TAMD71, TAMD72, TAMD74, TAMD103, TAMD162.
Parts Categories Available
The catalog covers all major Volvo Penta service categories. Engine and fuel system covers D-series, TAD, TWD, and legacy KAD / KAMD / TAMD cylinder kits (piston + liner + ring sets), head gaskets, head bolts, oil and water pumps, timing components, common-rail injectors, and turbochargers. Cooling system — particularly important for marine applications — covers fresh-water pumps, raw-water (sea-water) pumps, heat exchangers, charge-air coolers, oil coolers, thermostats, hoses, impellers, and zinc anodes. Drive systems covers IPS pod drive components (gear sets, propeller shafts, seals), Aquamatic sterndrive parts (DPS / DPH / DPI universal joints, gimbal bearings, shift cables), and inboard shaft drive flange and coupling parts. Marine electrical covers EVC (Electronic Vessel Control) components, EDC ECUs, alternators (12V / 24V), starters, glow plugs, sensors, and engine harnesses. Industrial-specific covers TAD genset control panel components, vibration dampers, mounting brackets, and industrial radiator packages. Filtration covers air, oil, fuel, water-separator, and crankcase ventilation filters cross-referenced to OE Volvo Penta part numbers and Fleetguard equivalents. Service kits — pre-bundled service / overhaul kits matched to engine model and operating hours (250h, 500h, 1000h, 2000h intervals).