Volvo EC360: Large Excavator Performance Demands Reliable Parts
The Volvo EC360 series represents the heavy end of Volvo CE’s crawler excavator range. Spanning the EC360B, EC360C, and later EC360E models, this 35–38 ton class machine delivers exceptional digging forces — up to 27 tonnes bucket breakout force — and is built for quarrying, large infrastructure, and heavy earthworks. With a D13 engine producing up to 249 kW, parts quality and availability directly determine profitability. → Browse EC360 parts in our shop — over 1,800 references in stock.
EC360 Variants & Serial Number Guide
The EC360 family spans three major generations, each with engineering improvements. Identifying your exact variant before ordering prevents costly mistakes, particularly for hydraulic pumps and electronic components which differ significantly between B, C, and E generations:
| Model | Serial Range | Engine | Key Features |
|---|---|---|---|
| EC360B LC | 10001–110000 | D12D – 221 kW | Classic hydraulics, 2-spool valve |
| EC360B NL | 10001–110000 | D12D – 221 kW | Non-level boom variant |
| EC360C NL | 110001– | D13H – 249 kW | Improved fuel economy, new pump design |
| EC360C LR | 110001– | D13H – 249 kW | Long reach boom configuration |
| EC360E | 200001– | D13K – 257 kW | Stage V, CARE system, auto lubrication |
Main Hydraulic Pump & Valve Components
The EC360’s dual-circuit hydraulic system operates at up to 380 bar peak pressure. The main pump is a tandem axial-piston pump, and on the C/E series a load-sensing system optimises flow to actual demand. Pump failure is typically signalled by slow implement response, increased cycle times, and unusually high hydraulic oil temperature. → Browse EC360 hydraulic parts:
| Component | Part Number (EC360C) | Notes |
|---|---|---|
| Main hydraulic pump assembly | VOE14696083 | Tandem piston, ~380 bar |
| Main control valve block | VOE14696200 | 12-spool, EC360C specific |
| Swing motor assembly | VOE14624502 | Radial piston, 2-speed brake |
| Travel motor (LH/RH) | VOE14611880 | Piston type, dual speed |
| Hydraulic oil filter element | VOE14538853 | Return line, 10 micron |
| Boom cylinder seal kit | VOE14648920 | Full kit: bore + rod seals |
| Arm cylinder seal kit | VOE14648921 | Includes backup rings |
| Bucket cylinder seal kit | VOE14648922 | Complete seal set |
EC360 hydraulic pump in stock? Contact us with your serial number — we confirm compatibility before shipping anywhere worldwide.
EC360 Undercarriage: Heavy-Duty Track System
At 36+ tons operating weight, the EC360 undercarriage takes enormous punishment. Standard track shoe width is 600mm for the standard configuration, with 700mm and 800mm shoes available for softer ground. The undercarriage is the single highest-wear system on the machine — plan replacements proactively to avoid unplanned downtime:
| Undercarriage Component | Standard Spec | Expected Life |
|---|---|---|
| Track chain with shoes | 47 links/side, 600mm shoe | 3,000–6,000h |
| Triple grouser track shoes | 600mm / 700mm / 800mm options | 2,500–5,000h |
| Top rollers | 3 per side, sealed bearings | 3,000–5,000h |
| Bottom rollers | 9 per side, sealed/flanged | 3,000–5,000h |
| Front idler assembly | Spring-tensioned, grease-filled | Inspect every 500h |
| Drive sprocket (17T) | Bolt-on segment design | Replace with chain |
| Sprocket rim segments | 17-tooth, 3 pcs per side | Replace at 50% chain wear |
→ For undercarriage wear monitoring guidance, see our Volvo CE Undercarriage Maintenance Guide and pre-season inspection checklist.
Engine Parts: D12D and D13H Engines
The EC360B uses the D12D engine while the EC360C and later variants use the D13H/D13K. These are high-output engines with demanding service requirements. Fuel system cleanliness is paramount — always use Volvo-spec or equivalent-quality fuel filters to protect high-pressure injection systems. → Browse all EC360 engine parts:
| Engine Part | EC360B (D12D) | EC360C (D13H) |
|---|---|---|
| Engine oil filter | VOE20532237 | VOE20998367 |
| Fuel filter (primary) | VOE20514654 | VOE20514654 |
| Fuel filter (secondary) | VOE20745605 | VOE21834740 |
| Air filter outer | VOE11110215 | VOE11110447 |
| Coolant thermostat | VOE20758808 | VOE22276937 |
| Injector set (6 pcs) | VOE20798066 | VOE22325866 |
Electrical & Control System
The EC360C/E uses Volvo’s CareTrack telematics and an advanced CAN bus system. Electrical faults are frequently tied to harness damage in the boom/arm area, water ingress into the ICF panel, or battery issues in extreme climates. → EC360 electrical system parts and wiring & fuse components:
| Component | Part Number | Notes |
|---|---|---|
| Main frame harness | VOE14696450 | EC360C complete harness assembly |
| Instrument panel ICF | VOE14641500 | Colour display, EC360C fitment |
| Alternator 80A | VOE20496344 | 24V charging system |
| Starter motor 6kW | VOE20455222 | D13 engine fitment |
| Battery 170Ah (each) | VOE11038501 | 24V system uses 2 in series |
| Horn & alarm module | VOE14516200 | Includes backup alarm |
Common EC360 Failure Patterns
| Symptom | Likely Cause | Recommended Action |
|---|---|---|
| Loss of hydraulic power in boom | Main pump wear or relief valve drift | Pressure test system; rebuild or replace pump |
| Machine pulling to one side | Travel motor or motor valve fault | Inspect travel motor case drain flow rate |
| Excessive undercarriage wear | Incorrect track tension or abrasive conditions | Re-tension + consider wider track shoes |
| Engine derating (power reduction) | EGR or DPF fault (EC360E) | Check fault codes; clean or replace DPF filter |
| Swing bearing noise / grinding | Wear or improper lubrication | Grease swing ring; measure axial/radial play |
| Boom drift when parked | Control valve spool seal wear | Inspect boom holding valve and seals |
→ Related: Hydraulic cylinder seal kits guide | How to extend excavator life to 15,000 hours | New vs reman vs aftermarket parts comparison
Ready to Find Your Part?
354,000+ Volvo CE parts | 669 machine models | 6-month warranty | Worldwide shipping
We typically respond within 2 hours with availability and pricing.
